Panduit PUM-071-2S-D30 Fir Tree Push Mount Hi-Temp Nylon Cable Zip Ties 7.4" 50#

Description

Panduit PUM-071-2S-D30 Push Mount Hi-Temp Fir Tree Nylon Cable Zip Ties 7.4" 50#
***********************************  FREE SHIPPING!!  ***************************************
New, these are "Fir tree" push mounts, it will use a .25" (1/4") to .28" hole, you wrap the cable then push the fir tree into your hole and it stays secured (see pictures for examples).
These will be carefully repackaged if purchased in a quantity of less than 500 pieces, 500 pieces will ship in the manufacturers sealed bag as shown.  Choose from either 25, 50, 100 or 500 pieces.  The larger the quantity the less expensive they are per piece, as low as {{detail_product_description}}.20 each.  If you need us to rearrange the quantities for you just ask.
Made by Panduit who is know for their quality and considered as the best in the industry and used by many major manufacturers.  This is a Fir Tree barbed High Temperature nylon cable tie.  The fir tree is adjustable or can be removed from the cable tie which adds to the versatility of this mount, you can have the locking method close to the mount or apart from the mount (others are part of the cable tie and cannot be moved).
The cable tie is 7.4" long and will accommodate a cable bundle of 1.88".  The rated load is 50 pounds.  The color is black.  See below and our photographs for additional technical information.
This listing is for genuine
Panduit PUM-071-2S-D30 Push Mount Hi-Temp Fir Tree Nylon Cable Zip Ties 7.4" 50#.   Choose a quantity of
TWENTY FIVE (25), FIFTY (50), ONE HUNDRED (100) or FIVE HUNDRED (500) Cable Ties using the drop down menu at checkout.  The larger the quantity the less expensive they are per piece, as low as {{detail_product_description}}.20 each.  If you need us to
rearrange
the
quantities
for you just ask.
Thanks for looking!!
From the manufacturer:
Panduit PUM-071-2S-D30 Fir Tree Push Mounts provide increased retention and lower insertion force. Ideal for solution for securing wire harnesses in automotive, marine, white goods, heavy equipment and mass transit-rail markets. This assembly has a maximum bundle diameter of 1.88” (48mm) and a panel hole diameter range of 0.25”-0.28" (6.3mm-7.1mm). Made of Heat Stabilized Nylon 6.6 which satisfies the needs of high temperature applications. They are black in color.
Fasteners for automotive wire harnesses shall provide fifty pounds of pull-out force with no more than 45° maximum rotation of the installed bundle. When installed in the panel, the fastening method shall firmly retain a minimum wire gauge of 12 AWG within ± 10mm (.394") of the initial installation point. The mounts shall require no more than 14 pounds of insertion force. Mounts with wider cable tie slot capability may have a proportionately higher insertion and pull-out capability. Mounts shall be self-tensioning to prevent rattles and degradation of the mount over the life of the vehicle. The material for the mounts and the cable ties shall be heat stabilized Nylon 6.6, black. Application temperature range shall be -60°C to 115°C (-76°F to 239°F).
PANDUIT push mounts with umbrellas and push mount assemblies are a reliable and cost effective solution for securing wire harnesses in the automotive, marine, white goods, heavy equipment and mass transit-rail markets. Designed for 4.6mm to 10.0mm through holes and variable panel thicknesses, the push mounts insert easily and exceed manufacturers’ requirements for primary anchors of wire harnesses. The PANDUIT push mounts with umbrellas are compatible with all standard PAN-TY ® Cable Ties up to the standard 50 pound loop tensile ties. The PUM-925-M30 mount has expanded slot capability which allows the use of the 120 pound loop tensile Light-Heavy cable ties.
Push mount designs lock into a hole in a metallic panel or in a blind masonry hole
Edge clip mounts secure to a panel edge using metal barbs that dig into panel surface
Stud mounts secure onto threaded bolts by screwing or hammering on the bolt
Connector rings can be used to attach adjacent bundles to provide spacing and prevent vibration damage
Technical Specifications:
Fasteners for automotive wire harnesses shall provide fifty pounds of pull-out force with no more than 45° maximum rotation of the installed bundle. When installed in the panel, the fastening method shall firmly retain a minimum wire gauge of 12 AWG within ± 10mm (.394") of the initial installation point. The mounts shall require no more than 14 pounds of insertion force. Mounts with wider cable tie slot capability may have a proportionately higher insertion and pull-out capability. Mounts shall be self-tensioning to prevent rattles and degradation of the mount over the life of the vehicle. The material for the mounts and the cable ties shall be heat stabilized Nylon 6.6, black. Application temperature range shall be -60°C to 115°C (-76°F to 239°F).
Unique alternating Provides increased retention and lower insertion force, barb design reducing operator fatigue and improving productivity Umbrella fir tree design Locks securely into position and can be rotated 360 degrees, giving you a wider application range than fixed barb designs; also seals against dust and moisture Exclusive contoured Firmly retains a minimum wire gauge of 12 AWG (2mm Ø) anvil head within ± 10mm (.394") of the initial installation point, providing a low profile design Assemblies with Provide routing and anchoring for wire harnesses, PLT cable ties significantly reducing harness assembly time Production Parts Approval Meets the needs of Verband der Automobilindustrie Process (PPAP), 3-D, and (VDA) and Automotive Industry Action Group (AIAG) International Materials Data compliant documentation, allowing parts to be listed to Sheet (IMDS) capability IMDS site ID
Specifications:
Application
They Are a Reliable and Cost Effective Solution for Securing Wire Harnesses in The Automotive, Marine, White Goods, Heavy Equipment and Mass Transit-Rail Markets
Product Type
Cable Tie Mount
Color
Black
Flammability Rating
UL94V-2
Environment
Indoor
Material
Heat Stabilized Nylon 6.6
Maximum Compatible Panel Thickness (In.)
0.28
Maximum Compatible Panel Thickness (mm)
7
Maximum Operating Temperature (°C)
115
Maximum Operating Temperature (°F)
239
Minimum Loop Tensile Strength (N)
222
Minimum Loop Tensile Strength (lb)
50
Minimum Operating Temperature (°C)
-60
Minimum Operating Temperature (°F)
-76
Mount Method
Push Barb
Overall Height (In.)
0.67
Overall Height (mm)
16.9
Overall Length (In.)
7.4
Overall Length (mm)
188
Overall Width (In.)
0.65
Overall Width (mm)
16.5
Resistance Properties
Heat Resistant